- Microprocessor based motion control
- 10 positions available
- 4 different speeds
- Easy programming
- Remote keypad available
- 100 to 250 Vac operation, 50 or 60 Hz
- Ramped start and stop operations
- 1/4 or 1/2 HP
HS443K
The HS443K features an output shaft on
each side of the gearbox which is fitted with a sprocket
(21 teeth; for chain #35). (1 sprocket supplied with
motor, additional sprocket options available).
HS443DK
The HS443DK has the same features that
the HS443K but supplied with a 3 inch wide cable drum on
the shaft instead of a sprocket.
HD443K
The HD443K is primarily used to operate
curtains horizontally. The HD443K will motorize its load
through a grooved cable drum. There is a second output
shaft which can be fitted with a sprocket or a 3 inch
wide cable drum.
HS471K
The HS471K is designed to operate heavy
maskings vertically. The HS471K is fitted with a
sprocket (21 teeth; for chain #35). There is one output
shaft available on the HS471K.
HD471K
The HD471K is used to operate heavy
curtains or maskings vertically. The HD471K utilizes a
grooved cable drum.
